MAHLE RemotePRO, User Manual

Page: 26 / 37

RemotePRO
User Manual
28
Calibration with
Programming
Most modern vehicles require
modules to be programmed
on the vehicle before they can
be calibrated, such as ADAS
modules and window control
modules
Programming a module is done
with connection to the OEM
server to ensure that the module
works as intended by the manu-
facturer. Calibration teaches the
module how to operate properly
Programming/Coding
Most modern vehicles require
modules to be programmed on
the vehicle; some modules must
be reconfigured after battery
removal or when installing new
sensors, such as parking sensors
Programming a module is done
with connection to the OEM
server to ensure that the module
works as intended by the
manufacturer
Service reset
Perform vehicle service mainte-
nance reset (oil service, AdBlue
refill). Perform basic vehicle
functions (bleed brake fluid or fuel
system, TPMS reset warning).
Restore functionality after replac-
ing a sensor or actuator (12V
battery, DPF pressure sensor,
crankshaft sensor, NOX sensor )
Resetting is used to reset/
assist in general vehicle
maintenance, e.g., for retraction
of brake caliper motors prior to
replacement of rear brakes
Surveys and special
configurations
Perform a diagnostic support or
survey
To perform more in-depth
requests where special
configuration is required, DPF
regenerations or perform special
functional tests on components
Key Programming Perform key programming on
the vehicle
Perform key programming on
the vehicle