MAHLE RemotePRO, User Manual

Page: 16 / 37

RemotePRO
User Manual
18
Wi-Fi configuration
1 Open the Internet browser on a PC or
smartphone.
Note: The PC or smartphone must
be connected to the same Internet
network as RemotePRO
2 Type the IP address of the Remote-
PRO device into the address bar of
the Internet browser being used
Note: The IP address is located on
the second line of the RemotePRO
device
3 Select the name of the Wi-Fi network
from the SSID drop-down menu
(a)
4 Write the password of the selected
network in the PASS PHRASE field
(b)
Wi-Fi configuration
You must have connected
RemotePRO to the LAN and the
vehicle in order to view the IP of
the device.
5 Select the security protocol from the
SECURITY TAPE drop-down menu
(c)
Note: It is recommended to use WPA
/ WPA2
6 Click on SEND (d)
7 The configuration confirmation page is
displayed. You can disconnect the LAN
cable and reboot the device