16 Series, Model - 2816 HST
54
REAR PTO CONTROL LEVER
CLUTCH PEDAL
REAR PTO SHAFT
POWER
TA
K
EOFF
(PTO)
Rear
PTO
The
rear
PTO
is
a
540
RPM
with
a
34.9
mm
(1
3
/
8
inch)
diameter
6
spline
output
shaft.
ENGAGE
THE
REAR
PTO
AS
FOLLOWS:
1. Push
the
clutch
pedal
fully.
2. Move
the
PTO
control
lever
forward
or
rearward.
3. Release
the
clutch
pedal
slow-
ly.
DISENGAGE
THE
REAR
PTO
AS
FOLLOWS:
1. Push
the
clutch
pedal
fully.
2. Move
the
PTO
control
lever
to
the
N
(Engine
Start)
Slot.
NOTE:
Keep the PTO control
lever in the OFF position when
starting the engine and when the
PTO is not being used.
3. Release the clutch pedal
slowly.
The following table shows the required engine speed to get the required
Rear PTO output shaft speed.
PTO Output
Required
Shaft Speed
Engine Speed
540 RPM
2356 RPM
PTO driven machinery can cause serious injury or death, usually due
to wrapped clothing. When required by the job to be in the drive shaft
area, stay clear of rotating parts. Before working on the drive shaft,
or servicing or clearing the driven machine, where applicable on this
tractor, put the PTO clutch lever in the DISENGAGE position, the PTO
lever in the NEUTRAL or OFF, and STOP the engine.
M125A
OPERATING INSTRUCTIONS _______________________________________________
