BA322301-en
49
5 Check the oil level in the hydraulic unit and top up with hydraulic oil if
necessary.
Venting with mounted support structure
1 The lift is in a completely retracted state.
2 Extend the lift about halfway.
3 Remove the middle sealing plug (C) of the respective holder.
4 Further steps analogous to section
“Bleeding
via the lifting unit
”
.
WARNING
Depending on the amount of air in the stroke unit, the piston rod and mount will
collapse sharply. Risk of injury!
C
Summary of Contents for ZS SQUARE II 3.5
Page 16: ...16 BA322301 en 2 4 3 Set up Diagrams...
Page 32: ...32 BA322301 en B B 3 4 B C 5...
Page 52: ...20 PL670000_002 de...