6
BA322301-en
1.3
What to Do in the Event of Defects or Malfunctions
•
If any irregularities occur, immediately lower or support the lift to the basic
position.
•
Turn off the main switch and secure against unauthorised use.
•
Contact service team.
1.4
What to Do in the Event of an Accident
•
Notify first aiders, the ambulance service and/or immediate care doctor:
o
Where did the accident happen (address, workshop ...)?
o
What happened?
o
How many are injured?
o
What injuries have occurred?
o
Who is reporting the accident?
•
Keep calm and answer questions.
1.5
Requirements for the Operating Personnel
All persons involved in the operation of the equipment must
•
be 18 years of age or older,
•
have the mental and physical capacity for their role,
•
be demonstrably trained and instructed in writing in the operation of the
system,
•
have read and understood the operating instructions, in particular the in-
structions on what to do in the event of a fault,
•
demonstrate experience and knowledge in handling the equipment and the
hazards it presents,
•
be instructed in safety guidelines on record.
1.6
Requirements on Service Personnel
Persons who are entrusted with the assembly, maintenance and/or
disassembly of the equipment must in addition:
•
be demonstrably trained and instructed in the required work,
•
can provide evidence of appropriate qualification for work on the electrical
equipment of the plant (e.g. as a qualified electrician),
•
be able to demonstrate expertise for vehicle lifts. This includes, following
DGUV V308-002, sufficient knowledge in the field of lifts and the relevant
statutory occupational health and safety regulations, accident prevention
regulations and generally accepted rules of technology to be able to assess
the safe working condition of the lift to be tested. Qualified persons shall
not only consider the current condition of the lift during the inspection. They
must also be able to estimate how the lift and its structural parts will be-
Summary of Contents for ZS SQUARE II 3.5
Page 16: ...16 BA322301 en 2 4 3 Set up Diagrams...
Page 32: ...32 BA322301 en B B 3 4 B C 5...
Page 52: ...20 PL670000_002 de...
