BA322301-en
43
6.3
Six-Monthly Inspection
6.3.1
Oil Level and Hydraulic Oil
Trouble-free operation of the lift is only possible with functioning hydraulic oil.
The hydraulic oil may be non-functional if it has the following characteristics
and should then be replaced immediately:
•
Turbidity
•
Pollution due to solids
•
Untypical smell
•
Segregation or mixing
•
Foaming
Regardless of the aging of the hydraulic oil, the oil level in the hydraulic unit
must be checked every six months as follows:
1 Lower lift incl. attachments completely.
2 Remove the centre cover. For optional floor-level installation, additionally
remove the centre cover of the installation frame.
3 Unscrew the oil dipstick (A) on the hydraulic unit.
4 To measure the oil level, place the dipstick only
on the screw fitting, see Fig. The oil level
should be between the min. and max. marks.
5 If the oil level is below the min. mark, hydraulic
oil must be topped up in accordance with the
technical data.
6 Screw the oil dipstick (A) back in completely.
A
Summary of Contents for ZS SQUARE II 3.5
Page 16: ...16 BA322301 en 2 4 3 Set up Diagrams...
Page 32: ...32 BA322301 en B B 3 4 B C 5...
Page 52: ...20 PL670000_002 de...
