BA322301-en
31
4.6
Optional Equipment
4.6.1
Hinged Cover Frame
To lower lifts with swing arm supports to floor level, they can be supplied with a
hinged cover frame.
NOTICE
The hinged cover frame must be set in concrete with the installation box. A
subsequent installation is no longer possible.
Before the lift can be driven on with a vehicle, the following preparations must
be made:
1
Turn the main switch to position "I".
2
Remove filler pieces for the closed state (A).
3
Open the hinged cover (B) and extend the lift by pressing the UP button for
approx. 1 m.
4
Close the hinged cover (B) and insert the filling pieces for the open state
(C).
5
Retract the lift completely by pressing the DOWN button.
2
A
B
B
Summary of Contents for ZS SQUARE II 3.5
Page 16: ...16 BA322301 en 2 4 3 Set up Diagrams...
Page 32: ...32 BA322301 en B B 3 4 B C 5...
Page 52: ...20 PL670000_002 de...
