MAHA FWT 1 Euro, Operation & Maintenance Manual

Page: 82 / 134

PC Program Operation Eurosystem / Profi-LON
D1 E101BA1-GB09 4.43
4.6.4 AU-Quality Control (Emission Testing)
The menu point „AU-Quality Control“ provides a software which completes your system of
documentation for the quality control measures with the AU Emission Testing. Your defect
statistic runs automatically when using the MAHA emission tester. An existing recognition of the
workshop will only continue to be valid if the Motor Vehicle Guild is shown that an Quality
Control System has been introduced. The Quality Control documentation covers following
areas:
Š
Naming of the qualified personnel (skilled workers, responsible persons and AU authorized
Emission Testing)
Š
Training planning
Š
Defect statistic
Š
Test seal management
Š
Control of the calibration and maintenance deadlines of the AU equipment
Internal measures to maintain the quality of AU testing during testing and documentation.
1 Activate <F6 AU-Quality Control> in the
administration menu.
Following screen appears:
2 Select the desired sub-point in menu „AU-
Quality Control“ using the cursor key and
confirm with <RETURN>.
1 Additional functions are described in their
own operating manual „QS-System with AU
Testing“ .