MAHA FWT 1 Euro, Operation & Maintenance Manual

Page: 21 / 134

Eurosystem / Profi-LON Profi-LON Operation
3.2 D1 E101BA1-GB09
3.2 Test Procedure
Rotating test stand rollers are potentially dangerous.
If both sensor rollers of the brake tester are pushed down with main switch turned on the
rollers will start up.
Be sure the vehicle has enough ground clearance.
4-wheel drive vehicles with a rigid 4-wheel drive control may only be tested on a suitable
4-wheel drive test lane (optional).
Before switching on the test lane it should be visually inspected for satisfactory condition.
No vehicle may be on the test lane.
3.2.1 Switching on the Test Lane
1 Switch on
Turn main switch to position „1“ .
⇒
ON lamp lights up.
2 Initialization
Please wait.
→
ON lamp goes out.
→
Pointers of display first go below zero and then
return to zero point of brake tester scale.
→
ON lamp lights up briefly..
3 Press ON key
→
ON lamp lights up again.
→
Left pointer goes to zero point of side-slip
tester scale (if connected).
→
Test stand is ready.!
The ON key corresponds with the
 
key on the remote control.