MAHA FWT 1 Euro, Operation & Maintenance Manual

Page: 104 / 134

PC Program Operation Eurosystem / Profi-LON
D1 E101BA1-GB09 4.65
4 Brake effectiveness test right
a. Start the right hand roller set via the Motor-On-key on the remote control.
⇒
The right hand roller set runs forward, the left-hand runs backwards.
b. Press the brake pedal slowly until the noted pedal force is reached.
⇒
The roller drive switches off as soon as the pre-set slip is reached.
Slip is not reached?
If the brake force of the vehicle brake is not enough to reach slip, then the roller drive is
switched off with the Motor-Off-key of the remote control.
⇒
The max.brake force is displayed by the right-hand bar.
c. Release brake pedal immediately.
⇒
The measured max. brake force is shown by the right hand bar.
⇒
The left hand bar shows the brake force of the left-hand side.
5 Storing measurement values
The vehicle must be on the roller set in order to store. If the vehicle is lifted out of the roller
set with the brake test, the vehicle must be driven onto the roller set anew for storing of the
measurement values.
Storage keys of the remote control
IFB3
Profi-Eurosystem
Front axle (FA)
Parking brake (PB)
Rear axle (RA)
6 Exiting the brake tester
a. Wait until the rollers stop.
b. Slowly drive the vehicle off the roller set.
7 Return to the Standard-Mode
Select Standard-Mode with <F9>.