Maguire Products FLEXBUS, Instruction Manual

Page: 12 / 29

M A G U I R E P R O D U C T S , I N C .
12
M A G U I R E

FLEXBUS™
Receiver Configuration
The Receiver configuration
screen is accessible from the
Home screen. Pressing a
receiver on the Home
Screen, takes you to the
Receiver's Configuration
screen. The receiver that
you are configuring is
identified by the Receiver's
ID number on the receiver
images on this screen. You
can select another Receiver
by using the Receiver
navigation arrows at the
bottom center of this screen.
Receiver Navigation
Receiver Navigation and Status Panel - This multi-function
panel displays messages and receiver status, allows for
navigation to each Receiver's configuration screen using the
arrow buttons, and allows the receiver to be turned OFF or ON.
The receiver symbol can display the following states:
Pressing the Receiver symbol toggles receiver OFF or ON. This symbol
indicates that the receiver is turned off and will not run.
This symbol indicates that the controller has lost communication with the
receiver. The receiver will not run in this state.
Receiver Configuration Fields
Blowback - Blowback is a pulse of air to clear the filter. Blowback has two
configuration fields. Skip cycle defines the number of cycles the receiver will skip
between blowback pulses. Default for Skip Cycle is 3. Setting Skip Cycle to 0
(zero) will pulse every time. Time Interval is a multiplication factor of 400ms to
pressurize the charge canister. Default Time Interval is 1 (1=400ms).
Load Time - The time in seconds that the receiver will load.