Maguire Products FLEXBUS, Instruction Manual

Page: 6 / 29

M A G U I R E P R O D U C T S , I N C .
6
M A G U I R E

FLEXBUS™
Flexbus Home Screen Overview
Live View Panel (gray area) - Displays the live view of Receivers Navigation Menu
Returns to Home
screen
Display Pumps
Changes the Live view
panel to Pumps
Event Log and
Alarm History
Flexbus
Firmware
Information
Setup
Enters password
protected setup
screens.
Receivers
Navigation / Setup of all Receivers
Pumps
Navigation / Setup of all Pumps
Flexbus Setup and Configuration
Flexbus uses a MAC address to individually identify each Flexbus pump and
receiver. Identification and numeric assignment of each Flexbus pump and receiver
is setup within the Flexbus controller through the order that the pump or receiver is
turned on and discovered during the Pump Assignment routine and the Receiver
Assignment routine setup processes.
Once the initial setup has been completed, the Flexbus system will retain the setup
and identification of each pump (a single pump with Flexbus Lite) and each receiver
indefinitely. After the initial identification order and numeric assignment has been
saved, the operator can later make adjustments to the pump's numeric assignment
order and to the receiver numeric assignment order and assign a 4-character
alphanumeric identification name to each receiver.
Secondary Control Setup* - Flexbus has the option of installing a second
controller to mirror the primary control at a second location on the communication
line. To add a second controller, enter the password 12358 and select Secondary.
All initialization of pumps and receives must to be done on the Primary controller.
* excludes Flexbus Lite