61
OPERA
TION
7. Manually Controlled Operation
Note:
Using the DSP6001 without a computer will limit its testing
capabilities.
7.1
HOW TO CHOOSE DESIRED CHANNEL WHEN USING TWO
DYNAMOMETERS
To select the desired channel (TSC1 or TSC2):
1. Press SHIFT.
2. Press AUX SETUP button. The display should appear as follows:
POWER
BRAKE STATUS
SET POINT
SET POINT
P
I
D
TORQUE
SPEED
STATUS
Figure 7–1 Dynamometer Channel Menu
3. Press POWER UNITS button until the desired channel is reached.
4. Press SHIFT to return to main menu.
Note:
The desired dynamometer channel must be chosen in order to
continue with the following steps. All steps that are completed
will be saved within that channel until the information is manually
changed or the DSP6001 is reset. (To reset the DSP6001, refer to
Section 9.4 – Resetting the DSP6001
.)
Note:
When using a dynamometer with a torque transducer or auxiliary
instrument, the previous instructions will turn your TSC2 channel
display “ON” allowing you to view information for both channels
simultaneously.
