38
Magtrol AN 2000 C
Instruction Manual
INPUT SIGNAL
•
Configuration ........................ differential asymmetrical
•
Max Applicable voltage ........................... ±300 mV DC
•
Resolution ..................................................... 0.5 µV
•
Input impedance .......................................... 100 M
Ω
•
Excitation ................... 10 V @ 120 mA, 5 V @ 120 mA
ACCURACY AT 23º ±5º C
•
Max. error ............... ± (0.1% of the r2 digits)
•
Temperature coefficient.......................... 100 ppm/ ºC
•
Warm-up.................................................10 minutes
FUSES (DIN 41661) - (recommended)
•
AN 2000 C (230/115 V AC).................... F 0.2 A/ 250 V
•
AN 2000 C1 (10-30 V DC) ........................F 2 A/ 250 V
•
AN 2000 C2 (24/48 V AC) ..................... F 0.5 A/ 250 V
A/D CONVERSION
•
Technique ................................................ dual slope
•
Resolution ................................................. (±16 bit)
•
Read rate ........................................................ 16/ s
FILTERS
Filter P
•
Cut -off frequency (-3 dB).............. from 4Hz to 0.05Hz
•
Slope .........................................from 14 to 37 dB/10
Filter E
•
Programmable.............................................10 levels
DISPLAY
•
Main ...................... -32000/32000, 5 digits 14 mm red
•
Auxiliary ..................................1 digit 7.62 mm green
•
Decimal point ..................................... programmable
•
LED's ...........................14 (programming and control)
•
Display update time......................................... 62 ms
•
Positive over-range .......................................+oVFLo
•
Negative over-range....................................... -oVFLo
POWER SUPPLY
•
AC voltages. 115/ 230 V, 24/ 48 V (±10%) 50/60 Hz AC
•
DC voltages.............................................10-30 V DC
•
Consumption ......... 5 W (without options), 10 W (max.)
ENVIRONMENTAL
•
Operating temp. ...-10ºC to 60ºC (0ºC to +50ºC s/ UL)
•
Storage temp. ..................................-25ºC to +85ºC
•
Relative humidity ............................... <95 % at 40ºC
•
Altitude max................................................. 2000 m
•
Front Sealed .................................. IP65 (Indoor use)
MECHANICAL
•
Dimensions ....................................... 96x48x120 mm
•
Panel cut-out............................................ 92x45 mm
•
Weight ...........................................................600 g
•
Case material ............... UL 94 V-0 rated polycarbonate
5. TECHNICAL SPECIFICATIONS
