32
Magtrol AN 2000 C
Instruction Manual
The figure 32.1 shows the indication (
InP-1
) corresponding to the configuration menu
for the PIN 1 function. Press the
ENTER
key to accede this configuration.
ENTER
To access to the programming of the PIN1 function.
To skip over this menu and go to PIN 2.
ESC
To exit from the programming mode without saving changes.
Choose the function number [0-36], according to the table.
To change number (hold down to increment automatically).
ENTER
To save the entry into the memory and return to the run mode.
ESC
To exit from the programming mode without saving changes.
MENU 6A - PIN 1 programming
This menu allows selecting the logic function for PIN 1. Available functions are represented by a number from 0 to 36. Consult
tables to find the number corresponding to the desired function (pages 28 to 30). The instructions given below apply to pin
function 1. Follow the same procedure to configure the rest of the pins.
[32.1] Menu PIN 1
B
A
TARE
HOLD
LIMIT
MAX
MIN
DATA
DSP2
INP2
FLT
STORE
DSP1
INP1
2
1
4
3
TARE
RESET
LIMIT
MAX/MIN
ENTER
ESC
DATA
PROG
TEACH
PRG
RUN
[32.2] Function number
B
A
TARE
HOLD
LIMIT
MAX
MIN
DATA
DSP2
INP2
FLT
STORE
DSP1
INP1
2
1
4
3
TARE
RESET
LIMIT
MAX/MIN
ENTER
ESC
DATA
PROG
TEACH
PRG
RUN
