12
Magtrol AN 2000 C
Instruction Manual
In the step-by-step instructions, you are given the action of the three buttons mainly
used to program data. The normal procedure at each step is to push on
a
number of times to make changes and push on
ENTER
to validate changes and
advance to the next programming step. At the end of a complete menu sequence the
meter returns to the run mode saving changes in memory.
In general the following actions can be made during the program mode.
ENTER
validate changes and advance to next step
ESC
discard changes and go to the run mode
select among a list of available options / shift to next digit to the right
increment digit value
[page nº/figure nº] Mnemo
With respect to the figures in the step-by-step instructions, the display indications may have the
following meanings:
1./ The display shows one of the available options with filled-out segments. That means
that the display shows the choice made previously. The use of
allows to select from
available options.
2./ A series of black "8" also represents the display indication of a previous choice, with
the difference that it cannot be changed in the current step. If it is already the desired
parameter, you may exit from the menu by a push of
ESC
without making changes or,
if wanted to modify it, a push of
ENTER
advances the meter to the next step where
changes are allowed.
3./ A series of white "8" represents any numerical value that is programmed by using keys
(increment digit value) and
(advance to the next digit).
The programming instructions are composed by a general description and a series of step-by-step instructions to be followed
sequentially. Each menu step is represented by an illustration of the display and keyboard module with indicators (display and
LED's), reference [page number. figure number] and a text describing the action of each key at that step.
B
A
TARE
HOLD
LIMIT
MAX
MIN
DATA
DSP2
INP2
FLT
STORE
DSP1
INP1
2
1
4
3
TARE
RESET
LIMIT
MAX/MIN
ENTER
ESC
DATA
PROG
TEACH
PRG
RUN
Program
module and
menu step
indicators
