Magtek ExpressCard 500p Installation And Operation Manual Download Page 8

Page: 8 / 68

Select Lanaguage

Press NEXT to continue installation.

Select the radio button to accept warranty

agreement terms.
Press NEXT to continue installation.

Ensure the printer is NOT connected to the PC

during installation. If it is connected, disconnect it

before advancing.
Press NEXT to continue installation.

Accept the default installation location.
Press NEXT to continue installation.

Accept the default standard installation.
Select NEXT to continue.

Select Start Menu Folder. Accept default.
Select NEXT to continue.

Select default settings.
Select NEXT to continue.

2-1 Installing the Print Driver (continued)

Follow the installation procedure scrupulously. All versions of Windows and Macintosh require the user to have administrator rights to

install the driver.

Summary of Contents for ExpressCard 500p




































































Search results

Summary of Contents for ExpressCard 500p

Reviews:

Brands by name

Popular brands

Magtek ExpressCard 500p, Installation And Operation Manual

Search results

Summary of Contents for ExpressCard 500p

Reviews:

Brands by name

Popular brands