4 - Command Set
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer’s Manual (COMMANDS)
Page 83 of 247 (
D998200136-31
)
4.3.26
Command 0x32 - Get BIN Whitelist Table - Non Financial Format
The device supports a BIN whitelist for non-financial cards that holds up to six six-digit Bank
Identification Numbers (BINs). After a cardholder swipes a non-financial card, the device looks up the
card’s BIN in this whitelist. If it finds the card’s BIN and if the card’s PAN is longer than the Max
Financial PAN Length in section
, the device will not encrypt data ID 4, 5 or
6 in the
Report 0x23 - Card Data Report
The host uses this command to direct the device to send the current contents of the BIN whitelist for non-
financial cards to the host. The device responds in the following format:
Table 4-45 - Usage Table for Command 0x32 (Get mode)
Bit
7
6
5
4
3
2
1
0
Byte 0
0x32
Byte 1
Number of bytes to follow (36 = 0x24 for the 6 slots at 6 bytes each)
Bytes 2..7
Data from BIN Whitelist Table Slot 1
Bytes 8..13
Data from BIN Whitelist Table Slot 2
Bytes 14..19
Data from BIN Whitelist Table Slot 3
Bytes 20..25
Data from BIN Whitelist Table Slot 4
Bytes 26..31
Data from BIN Whitelist Table Slot 5
Bytes 32..37
Data from BIN Whitelist Table Slot 6
If an error occurs, the device terminates the command and reports the error in ACKSTS of
. For a full list of error codes, see
