4 - Command Set
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer’s Manual (COMMANDS)
Page 123 of 247 (
D998200136-31
)
6)
If the cardholder confirms the amount or makes a payment type selection, then depending on the card
type the host specified in the command, the device arms the MSR and/or ICC slot, turns on the LED
near the slot (if any), and displays either
SWIPE
or
INSERT CARD
. If the cardholder presses the
Cancel
button or the transaction times out, the device performs
Figure 4-17 – DynaPro Go Request Start EMV Transaction Insert Card - Contact Only
Figure 4-18 – DynaPro Go Request Start EMV Transaction Insert Card - Contactless Only
Figure 4-19 – DynaPro Go Request Start EMV Transaction Insert Card - Contactless and MSR
