7 - Introduction to User Interface
DynaFlex II Go| EMV Contactless/NFC Card Reader | Installation and Operation Manual
Page 35 of 55 (
D998200595-100
)
7.7
LED Behavior: Errors, Timeouts, and Canceled Transactions
The table below contains LED behavior related to errors, timeouts, and canceled transactions. If the
device is exhibiting LED behavior not previously mentioned, it may be contained in this section.
Figure 7-27 - LED ON/OFF State
Figure 7-28 - BCR Light ON/OFF State
Table 7-2 - LED Behavior for Errors, Timeouts, and Canceled Transactions
Device Model
Error LED Behavior
Timeout LED Behavior Cancel LED Behavior
DynaFlex II Go BCR
Connected via USB
LED 1,2 ON – BCR ON
> LED1,2 ON, BCR
OFF + Double Beeps
> Ready
LED1,2,3 OFF – LED 4
BCR ON + Double
Beeps
LED 1,2 ON – BCR ON
> LED1,2 ON – BCR
OFF + Double Beeps
> Ready
DynaFlex II Go BCR
Connected via BLE
LED 1,2 ON – BCR ON
> LED1,2 ON, BCR
OFF + Double Beeps
> Ready
LED1,2,3 OFF – LED 4
BCR ON + Double
Beeps
LED 1,2 ON - BCR ON
> LED1,2 ON - BCR
OFF + Double Beeps
> Ready
DynaFlex II Go MSR
Connected via USB
LED 1,2 ON
> LED1,2,3 OFF – LED
4 ON + Double beeps
LED1,2,3 OFF – LED4
ON + Double beeps
LED 1,2 ON
> LED1,2 ON + Double
Beeps
> Ready
