7 - Introduction to User Interface
DynaFlex II Go| EMV Contactless/NFC Card Reader | Installation and Operation Manual
Page 29 of 55 (
D998200595-100
)
7.5.5
DynaFlex II Go Bluetooth LE Host Connected
When the device establishes a connection to the host via BLE and is prepared for secure communication,
all three LEDs (LED 1, 2, 3) will illuminate steadily.
Figure 7-13 - BLE Connected to Host
7.5.6
DynaFlex II Go Bluetooth LE Host Disconnect
When the device is disconnected from the host Bluetooth LE connection, LED 3 will power off first and
after 4 seconds, LED 2 will power off, LED 1 will remain powered on as the device returns to Ready
State.
Figure 7-14 - Bluetooth LE Disconnect LED Sequence
7.6
LED Behavior: Successful Transactions
7.6.1
BCR Payment Transaction Successful (Connected via USB)
When the operator presses the
Start
button on the host device, LED 1,2, and the BCR status light will be
. When a barcode is detected, only LED 1 will remain illuminated, the BCR
