MC-35A
Auto creaser
25
Sensor knob
Sensor trigger
In Auto feed Mode,Turn the knob clockwise, the loadting table will rise
higher ,vise versa.
In Manual Mode, the knob should be turned to be max clockwise, or there will
be error report E-2 (Elevator moter error)
6.3.5 Skew Adjustment
Fixed side plate
Skew adjust wheel
If user find
s
the crease/perforate is skewed, you need to adjust the angle
of fixed side guide to change the crease angle. As per above picture, if we
turn the wheel downward, the fixed side plate will turn leftward. And vise
versa. Normally, if the paper is perfectly square, it needs no adjustment.
