Auto creaser
9
MC-35A
4.4 Feeding extension
We can see there are 2 screws on
rear
of feeding table, and there are 2
holes on side of extension table.
4.5 Power socket and switch
Switch
(Press
“O” is off,
press
“|” is On)
Socket
Before the operation, please connect the socket to the electricity with attached
cord, press the switch (when the red point is down, the machine is power on.)
Fuse under the socket is
to
protect the system in case the current is over
3.15A, to replace the Fuse, we firstly
un-
clip the cartridge with a straight
screw driver. Secondly remove the broken fuse from the cartridge and load a
new one back. At last, we reload the cartridge.
Fuse
