1. Use cross screwdriver to loosen the screws and remove the switch plate.
WARNING!
Always disconnect the machine from the power source before
servicing.
2.Remove the connecting wire of the indicator light by cross screwdriver, and turn the
nut on the indicator light counterclockwise; then remove the indicator light set.
3.Take the 220V indicator light and install at reverse direction by the above steps , and connect the connecting wire.
4.Dismantle the nut of the temperature controlled switch by 14mm wrench, and remove
the temperature controlled switch.
110V CHANGED TO 220V
MAGNUM INDUSTRIAL MI-91500 DELUXE 14” BAND SAW
Summary of Contents for MI-91500
Page 1: ...MODEL NO MI 91500 OPERATING MANUAL...
Page 20: ......
