Magnum Industrial MI-91500, Operating Manual

Page: 8 / 24

7
INSTALLING THE FENCE ASSEMBLY
The MI-91500 is equipped with a deluxe T-fence and guide rail
system. Follow all assembly and adjustment instructions in the
manual supplied in the box with the fence.
INSTALLING THE FOOT BRAKE
This band saw is equipped with a foot brake located at the
bottom of the machine. The foot brake allows for immediate
immobilization of the blade and machine shut off.
1. Open the lower wheel cover door.
2. Attach the foot brake to the FOOT BRAKE MOUNTING
BAR (Q) using the two supplied CAP SCREWS AND LOCK
WASHERS (R) , in the assembly order shown in Figure 20.
3. Firmly tighten with the supplied 8 mm Allen key.
The foot brake is not designed to function as the primary stop
mechanism of this saw. The foot brake should be used for
emergency situations or any time it is necessary to immobilize
the blade quicker than normal. Under normal working
conditions the red stop button should be used as the primary
stop mechanism. Continuously using the foot brake as the
primary stop mechanism can lead to premature wear of the
brake and may cause damage to the motor.
ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-91500 DELUXE 14” BAND SAW
FIGURE 18: FENCE INSTALLATION
FIGURE 19: FOOT BRAKE LOCATION
FIGURE 20: FOOT BRAKE INSTALLATION
WARNING!
This tool is for indoor use only. Do not expose
to rain or use in wet or damp locations.
WARNING!
Do not operate the unit with a damaged power cord or plug.
20
19
18