Magnetic MHTM FlowMotion, Manual, Page: 57 / 80

57
Control unit MGC
Description of menus and parameters
6. Press the right button « ».
√
The safety prompt "Save changes?" appears.
›
If the changes are to be saved, press the right button « ». The
current settings are reset to factory settings. A restart is performed.
›
If the changes are not to be saved, press the left button « ».
7. Press the left button « » repeatedly until the operational view is
displayed again.
Via service password for all options
The operational view is displayed.
ä
Page 40, Fig. 28.
1. Press the right button « ».
√
The "Main Menu" menu is displayed.
2. Select the menu "Factory setting" with the two middle buttons « », «
».
3. Confirm selection with the right control button « ».
4. Enter "Service Password".
5. Confirm password with the right control button « ».
√
The message "Reset to factory settings" appears.
6. Select the desired option with the two middle buttons « », « ».
7. Confirm selection with the right control button « ».
√
The safety prompt "Save changes?" appears.
›
If the changes are to be saved, press the right button « ». The
current settings are reset to factory settings. A restart is performed.
›
If the changes are not to be saved, press the left button « ».
8. Press the left button « » repeatedly until the operational view is
displayed again.