43
Control unit MGC
Parameterisation directly at the control unit MGC
5.5.2
Further symbols
Function
Description
Wrong password entered. Access denied.
Reset values to factory settings. To do this, you must enter the
password "0000".
There is information. Check the "Information" menu. To do this,
press the left operating button.
There is a warning. Check the "Information" menu. To do this, press
the left operating button.
There is an error. Check the "Information" menu. To do this, press
the left operating button.
The passage direction from left is released.
The passage direction from right is released.
Table 15:
Further symbols