28
Control unit MGC
Description "mSwing Connect" programme
1. Click the "Closed (0°)" button.
√
The motor is de-energised. The setting mode is indicated by flashing in
yellow.
2. Move the blocking element to the desired target position.
√
After 5 seconds the target position "Closed (0°)" is accepted. The
position corresponds to 0°.
√
The swing door automatically switches to normal operation. If a buzzer
is installed, a short tone will sound.
3. Click the "Left" or "Right" button.
√
The motor is de-energised. The setting mode is indicated by flashing in
yellow.
4. Move the blocking element to the desired target position.
√
After 5 seconds the target position is accepted. The set value is
displayed in the "Target positions" field.
√
The swing door automatically switches to normal operation. If a buzzer
is installed, a short tone will sound.
5. Select remaining target position "Left" or "Right". To do this, repeat steps
3 and 4.
√
The 3 target positions are set.
4.5.2
Description of the buttons and parameters
Button /
parameters
Description
Homing target
Select the target stop for homing.
›
Target stop left (clockwise)
›
Target stop right (counterclockwise)
Write
setting
Changes for the target stop are accepted. Set target positions
"Closed (0°)", "Left" and "Right" are reset to the factory setting.
Align positions
Set target positions "Closed (0°)", "Left" and "Right". The set target
position "Closed (0°)" corresponds to 0°. After you have clicked one
of the 3 buttons, you have 10 seconds to move the blocking
element. The remaining time is displayed in the "Align positions"
area between the buttons.
Target positions
Display of the current positions for the right and left target stop.
Experte –
Deactivate motor
Disconnect the motor from mains. You can move the blocking
element freely and check the result in the status view.