82
MPT-333
Converting the locking unit
8. Place the washers on the threaded rod of the magnet as shown in the fig-
ure. Place 3 washers between magnet and holder. Place 2 washers be-
tween notch lever and union nut.
9. Screw the union nut onto the threaded rod.
10. Mount the magnet on the holder.
11. Tighten the union nut and secure with threadlocker such as Loctite 241.
M
ag0089
1
2
1
Fig. 41: Mount magnet, washers and union nut (normally open)
1 3 washers between magnet and holder
2 2 washers between notch lever and union nut
12. Convert magnets on the other side, e.g. magnet RL1.
√
The locking unit has been modified for the "normally closed" configura-
tion.
M
ag0089
2
Fig. 42: Locking unit configuration "Normally closed"
Summary of Contents for MPT-333
Page 1: ...Operating Instructions Full Height Turnstile MPT 333 Doc ID 5817 0028EN Version 00...
Page 89: ...89 MPT 333...
Page 90: ...90 MPT 333...
Page 91: ...91 MPT 333...
