manualshive.com logo in svg

Magnetic Autocontrol MPT-333, Operating Instructions Manual

The Magnetic MPT-333 is a versatile and efficient tool designed to enhance your work experience. Featuring a powerful magnetic base, this product offers stability and precision. For detailed instructions on how to maximize its potential, download the free manual from manualshive.com. Ready to elevate your work efficiency?

Share
Download
background image

43

MPT-333

Assembly

7.7 

Preliminary work for installation directly on the foundation

Prerequisites

 ›

The conduits have been placed.

 ›

The foundation has cured.

IMPORTANT!
Observe the separate instructions as well as the packaging in-

scriptions for the attachment material.

1.  Mark holes for sleeve with inner thread. A drilling template is included in 

the scope of delivery. 

ä

 

Page 38, Fig. 12.

2.  Bore holes for the sleeve with inner thread.
3.  Clean the boreholes with compressed air.
4.  Inject injection mortar into the boreholes.
5.  Screw in sleeve with inner thread by hand to the bottom of the boreholes.
6.  Wait for the curing time. Follow separate instructions. 

 

√

The preliminary work has been completed. You can assemble the compo-

nents of the pedestrian gate. 

ä

 

Page 43, chapter 7.8.

7.8 

Mounting the MPT-333

The mounting of the turnstile on a base frame and the mounting of the turn-

stile directly on a foundation are identical in procedure. Only the attachment 

material is partly different. The following figures show the installation with the 

optional base frame.

Summary of Contents for MPT-333





























































































Reviews:

No comments

Related manuals for MPT-333

Brands by name

Popular brands

Load more brands