![background image](http://html1.mh-extra.com/html/magnetek/telemotive-tr12-intelesmart/telemotive-tr12-intelesmart_instruction-manual_3587676055.webp)
Section 7 - Programming (continued)
Telemotive TR12 inteleSmart Receiver Instruction Manual – 03/01/07
53
7-14.4. Signal Strength Indicator Mode
The new RF Module is capable of measuring the signal
strength for the selected channel. To set the RF Module
to the signal strength indicator Mode, press and hold the
set button until the digital display goes blank. Then, let
off the set button. Now the display will indicate the
strength of a signal on that channel.
This feature can be helpful in identifying the best
frequency for your Telemotive System. If your
transmitter is off and the signal indicator shows a
number, consider moving the system to another
frequency.
Industry Canada Statement per Section 4.0 of RSP-
100
The term "IC:" before the certification / registration
number only signifies that the Industry Canada technical
specifications were met.
Section 7.1.5 of RSS-GEN
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received,
including interference that may cause undesired
operation.