![background image](http://html1.mh-extra.com/html/magnetek/telemotive-tr12-intelesmart/telemotive-tr12-intelesmart_instruction-manual_3587676041.webp)
Section 6 – Wiring (continued)
Telemotive TR12 inteleSmart Receiver Instruction Manual – 03/01/07
39
TABLE 3. 3-SPEED PROGRAMMING DIAGRAM.
STANDARD 3-SPEED 2 MOTOR SYSTEM (Using a 3-Speed Transmitter)
MOTOR 1 CONNECTIONS
MOTOR 2 CONNECTIONS
J8-4 HOIST UP (HOT J8-3)
J6-2 TROLLEY DIR 1 (HOT J6-1)
J7-6 HOIST 2
ND
SPD (HOT J7-5)
J6-6 TROLLEY 2
ND
SPD (HOT J6-5)
J7-4 HOIST 3
RD
SPD (HOT J7-3)
J8-2 TROLLEY 3
RD
SPD (HOT J8-1)
J8-6 HOIST DOWN (HOT J8-5)
J6-4 TROLLEY DIR 2 (HOT J6-3)
INDEPENDENT CONNECTIONS
J8-2 AUX 1 (HOT J8-1)
J9-2 AUX 2 (HOT J9-1) (LATCHABLE Rx S2-2)
J9-4 AUX 3 (HOT J9-3) (LATCHABLE Rx S2-3)
J9-6 AUX 4 ALARM (HOT J9-5)
RECEIVER And TRANSMITTER SWITCH SETTINGS
In the Receiver use the PDA Receiver Programmer to:
o
Set “Receiver access code” and “Frequency”.
o
In the “Receiver Programmer” screen, select under “System” “12 output 2 speed”.
o
In the “Set Status Words” screen, set RX and TX Status Word Switches S1 to S4 as shown below:
X’s are normally OFF (0) but may be turned ON (1) to enable additional features detailed in Section 7-11. Status
Word Programming.
In the transmitter:
•
3-Speed
telePendant
use the PDA Transmitter Programmer to:
o
Set “Receiver access code” and “Frequency”. (Must be same as receiver).
o
Select under “Tx Type” to “3 SPD 10K Pendant”.
o
Select under “Motor” the number “3”.
•
MLTX, JLTX and SLTX transmitter switch SW4 “D” program the configuration switches 5, 6 and 7 to OFF (0).
*NOTE: HOIST and TROLLEY are listed here as traditional configurations, the installer may choose to define the motors
differently.
Position
Switch
# 1 2 3 4 5 6 7 8
Rx S1
X X X 0 0 X X X
Tx S3
X
X X 0
0
0
0 0
Position
Switch # 1
2 3 4 5 6 7 8
Rx S2
0
X
X
0
0
0 X X
Tx S4
1
0 X
0
0
0
0 0
OUTPUTS
J8-4
J7-6
J7-4
MAIN HOIST*
MOTOR 1
2
ND
UP DN
OUTPUTS
J6-2
J6-6
J8-2
TROLLEY*
MOTOR 2
Dir 1 Dir 2
J8-6
J6-4
3
RD
3
RD
1
ST
2
ND
1
ST
1
ST
2
ND
1
ST
2
ND
3
RD
3
RD
J8-2
J9-2
J9-4
AUX 1
AUX 2
AUX 3
AUX 4 ALARM
INDEPENDENT OUTPUTS
J9-6