Magnescale MJ100, Manual, Page: 25 / 64

(E)
1
1. Notes to Users
Read all instructions carefully before use.
Save this manual for future references.
1-1. General precautions
When using Magnescale Co., Ltd. products, observe the following
general precautions along with those given specifi cally in this
manual to ensure proper use of the products.
• Before and during operations, be sure to check that our
products function properly.
• Provide adequate safety measures to prevent damage in case
our products Should develop a malfunction.
• Use outside indicated specifi
cations or purposes and
modifi cation of our products will void any warranty of the
functions and performance as specifi ed for our products.
• When using our products in combination with other
equipment, the functions and performance as noted in this
manual may not be attained, depending upon the operating
environmental conditions. Make a through study of the
compatibility in advance.
Contents
1. Notes to Users .......................................................1
1-1. General precautions .............................................................. 1
1-2. Precautions ............................................................................. 2
1-3. Installation ............................................................................. 2
2. Introduction .......................................................... 3
3. Operation .............................................................. 4
3-1. Name of each part ................................................................. 4
3-2. Resolution and output phase diff erence ............................ 5
3-2-1. Setting resolution ........................................................... 7
3-2-2. Setting the 1/2 division function ................................. 7
3-2-3. Direction
switching ....................................................... 8
3-3. Using the reference point ..................................................... 8
3-4. Setting the reference point .................................................. 9
3-5. Maximum Response Speed ............................................... 10
3-6. Alarm signal ........................................................................ 11
3-7. Supplying the power ........................................................... 11
3-8. Mounting the Interpolator ................................................ 12
3-9. Supplied ferrite core............................................................ 12
4. Output Connector............................................... 13
5. Specifi cations ...................................................... 15
6. Dimensions ......................................................... 17