7
/
48
3
Name and Function of Each Part
①
Module number setting switch
Sets the module number. The various parameters of the MG80-SC can be configured using a user-assigned module
number.
The MG80-SC has an IP address of 192.168.0.100 and a subnet mask of 255.255.255.0 as default values, but the
settings can be changed. In the event the assigned IP address is forgotten, set the switch to 0xF to start up with the
default value.
②
POWER lamp (PWR)
Indicates the operating status of this module.
Color Status
Meaning
Green Unlit
Power OFF
Lit
Measurement in progress with power ON
Blinking Setup in progress with power ON
③
ALARM lamp
Lights red when any counter module within the unit is in the alarm status.
Color Status
Meaning
Red
Unlit
Normal status
Lit
An alarm is detected in one of the modules
④
HOLD lamp
Lights orange when the hold function is activated in any counter module within the unit.
Color
Status
Meaning
Orange
Unlit
None of the counter modules are in the hold state
Lit
One of the counter modules is in the hold state
Blinking
When the reference point is used, one of the counter modules is in the reference point
wait state
⑤
⑥
⑧
④
⑩
③
①
⑦
⑨
⑫
②
⑪