4
. Adjust the banknote
guides according to the
length of the longest
banknote in the batch being counted,
a l i g n t h e b a t c h e d g e s ( s e p a r a t e
banknotes shall not protrude from the batch), and place it in the
middle of the hopper avoiding its skew. The counter will start operation
automatically. The count is stopped when the number of the notes equal to
the stacker capacity has been counted. After the banknotes have been
removed out of the stacker, the counter automatically resumes operation.
11
10
Figure 13
1
2
6
4
5
3
7
9
8
10
11
12
13 14
15
16
1
. Key/indicator of counting mode;
2
. Key/indicator of counting speed;
3
. Key/indicator of sorting mode;
4
. Key/indicator of batch mode;
5
. Currency selection key;
6
. Batch size/stacker capacity selection
key;
7
. Counting results clear key;
8
. Counted/ rejected banknotes report key;
9
. Accumulation mode key;
10
. Automatic/ manual start key;
11
. UV and MG detection ON/OFF key;
12
. Settings menu key;
13
. Currency indicator/ currency
selection hot key;
14
. Number of counted banknotes;
15
. Number of rejected banknotes;
16
. Amount of counted banknotes.
1
Now the counter is ready to work under the factory settings as follow :
— Interface language is English.
— Currency is automatic currency detection by the first banknote in a
batch.
— Counting mode is MIX.
— Start mode is automatic.
— Accumulation mode is off.
— Batch mode is off (because in MIX mode it's always disable).
— Counting speed is 1,200 banknotes per minute.
— Ultraviolet detection (UV) is off.
1
If required, the factory settings may be replaced by user settings.
3
. Adjust the feeder gap. The manufacturer presets the gap in accordance
with the currencies to be counted.
However, if the counter often rejects the known-good banknotes and the
report (
see subsection
«
Operating Keys
», «
Key
«
REPORT
» ,
Figure 52
and
Figure 53
) indicates «
Small Notes Gap
» and «
Double Note
» as the
reason of the banknotes rejection, it is necessary to slightly turn screw 1
clockwise (toward «
–
») to reduce the gap (
see Figure 1
). If the rejection
report indicates «
Skew
Error
» and «
Feed Error
», it is necessary to slightly
turn screw 1 counterclockwise (toward «
+
») to increase the gap (
see
Figure 1
). The gap between separating rollers and feeding rollers should
make one note to pass free between the rollers but to prevent two notes put
together from passing (
see Figure 14
).
Figure 14
— Magnetic features detection (MG) is off.
— Banknote density detection (DENSITY) is off.
— Orientation sorting (ORIENT) is off.
— Extended visual mode is off.
— Sound volume is 50%.
— Screen brightness is – 100%.
— Theme selection is by default.
— Stacker capacity is 200 banknotes.
— Reject pocket capacity is 50 banknotes.
— User’s profile is
«I
».
Separating
rollers
Feeding rollers
MAGNER PRB VALUE COUNTER
MAGNER PRB VALUE COUNTER
