7
GB
7
Accessories
7
Before starting
7
Unpacking the RV 2
8
Safety precautions
8
Instructions for disposal
9
Operational elements and connections
9
Front panel
9
Rear/connections
10
Remote control
10
Initial Operation
10
Tube replacement
10
Service and technical problems
10
Specifications
1) Instruction manual
2) Remote control
3) Batteries for remote control (2x AAA)
4) Mains cable
5) Screwdriver for the remote control
Dear customer,
Thank you for choosing the Magnat RV 2 valve amplifier.
Please read the following information carefully before starting to use the RV 2.
1. Remove the upper packaging segment carefully.
2. Remove the unit and position it on a flat and sturdy surface.
3. Remove the protective cover.
4. Remove the tube guard carefully upwards.
5. Remove the foam block from the tubes.
6. Replace the tube guard again.
THE RV 2 SHOULD NOT BE OPERATED WITH PACKAGED TUBES
UNDER ANY CIRCUMSTANCES!
THE TUBES BECOME VERY HOT DURING OPERATION. BODILY
CONTACT CAN RESULT IN BURNS. THEREFORE THE UNIT SHOULD
ALWAYS BE OPERATED WITH A MOUNTED GUARD.
UNPACKING THE RV 2
BEFORE STARTING
ACCESSORIES
TABLE OF CONTENTS
