1-800-MAGLINE
(624-5463)
Lift
Plus
®
25
UPPER LIMIT SWITCH
TOOLS NEEDED: #1 PHILLIPS SCREWDRIVER, BLUE THREAD LOCKER
Removal:
1. Turn power switch off and remove the battery.
2. Remove the top cover.
3. Remove the screws fastening the upper limit switch using a #1 Phillips driver.
4. Slide the wire connectors off of the upper limit switch terminals.
Installation:
1. Slide the purple wire connectors onto the upper limit switch terminals labeled “Com” and “NC”.
2. Coat the threads of the #4-40 X .5” long machine screws with thread locker.
3. Place the upper limit switch against the top of the column so that the holes line up and the roller on the switch
is the lowest part.
4. Fasten the upper limit switch to the column using the two screws. NOTE: Do not over-tighten the screws.
5. Install the top cover.
Item
Qty.
Part Number
A On/Off switch (includes wiring harness)
1
534410
B Up/Down switch (includes wiring harness)
1
534416
C Wiring harness/connector for remote control input
1
534409
D Wiring harness/connector for charger input
1
534408
E Wiring harness for green charging light
1
534411
F Wiring harness for red overload light
1
534412
B
A
C
D
E
F