![background image](http://html2.mh-extra.com/html/magliner/liftplus/liftplus_maintenance-manual_3511915017.webp)
1-800-MAGLINE
(624-5463)
Lift
Plus
®
17
FRONT ROLLERS
TOOLS NEEDED: NEEDLE-NOSE PLIERS OR E-RING TOOL
Removal:
1. Rotate the quick change latch upward to expose the front rollers.
2. Remove the e-ring that retains the front roller.
3. Remove the front roller form the front axle.
Installation:
1. Slide the front roller onto the front axle.
2. Install the .375” E-ring onto the front axle.
Item
Qty.
Part Number
A Caster shell - RH
1
532504
B Caster shell - LH
1
532503
C Caster assembly with plate
1
532500
D Lock nut with nylon insert - 5/6”-24
1
80606
E Screw - 5/16”-24 x 2” long
1
80346
F
Lock nut - M6
1
80612
G Split lock washer - M6
1
80794
H Screw - M6 x 20mm long
1
80362
Quantities listed are for one
arm of the LiftPlus.
CASTER ASSEMBLY
D
B
A
C
E
F
G
H
TOOLS NEEDED: 1/2” WRENCHES; PHILLIPS SCREWDRIVER; 10M SOCKET WRENCH
Removal:
1. Remove screw and lock nut to remove caster assembly from the LiftPlus arm.
2. Remove the screw, lock nut and washer from the caster shells to release the caster from the shells.
Installation:
1. Slide the caster shells around the caster plate as shown. Slide the M10 screw through both shells and secure
with the washer and lock nut.
2. Slide the caster shells into the LiftPlus arm and secure with 2” long screw and lock nut.
Top “lip” of the caster shells fit within
this groove for assembly.