1-800-MAGLINE (624-5463)
Page 15 www.magliner.com
CooLift
®
REPLACING REAR SWIVEL CASTER
TOOLS NEEDED:
TWO 9/16” WRENCHES
Note: It is important to keep the CooLift upright at all times.
Removal
Caution: Remove and replace only one caster at a time.
1)
With the cart sitting on a level flooring surface, the holding brake engaged and the rear access
panel removed, loosen the three screws (A,B) that hold the caster mount to the base of the cart
using the pair of 9/16” wrenches.
2) The entire rear swivel caster assembly can now be lowered and slid out of position.
Replacement
1)
With the cart sitting on a level flooring surface, the holding brake engaged and the rear access
panel removed, position the replacement rear swivel caster in place and insert the three screws
(A,B) through the base of the cart and the tighten the lock nuts (C) against the swivel caster mount
(D) using the pair of 9/16” wrenches.
2) Replace back access panel.
A
C
D
Item
Qty.
Part Number
A
Hex head cap screw - 3/8”-16 x
1-1/4” long
2
80026
B
Hex head cap screw - 3/8”-16 x
1” long
1
80025
C
Hex lock nut flange - 3/8”-16
3
80624
D
Caster assembly - 6” x 2” swivel
grey flat tread
1
130066
Quantities listed are for each rear swivel caster
B