1-800-MAGLINE (624-5463)
Page 14 www.magliner.com
CooLift
®
REPLACING FRONT CASTER
TOOLS NEEDED:
9/16” WRENCH
TWO 1/2” WRENCHES
Note: It is important to keep the CooLift upright at all times.
Removal
Caution: Remove and replace only one caster at a time.
1)
With the cart sitting on a level flooring surface and the holding brake engaged, remove the four
lock nuts (A) that hold the caster yoke (B) to the base of the cart with the 9/16” wrench.
2) The entire front caster assembly can now be lowered and slid out of position.
3) Remove the axle (C) and carriage nut (E) using the two 1/2" wrenches.
4) Remove the four carriage bolts (D) through the bottom of the caster yoke (B).
Replacement
1)
With the cart sitting on a level flooring surface and the holding brake engaged, mount the caster
mount to the bottom of the cart using four carriage bolts (D) and tighten with the 9/16” wrench.
2) Position the wheel inside the caster mount, insert the axle (C) and tighten carriage nut (E) using
the two 1/2" wrenches.
A
B
C
D
E
F
Item
Qty.
Part
Number
A
Hex lock nut flange - 3/8”-16
4
80624
B
Front caster yoke
1
309098
C
Axle assembly (includes E)
1
84501
D
Carriage bolt - 3/8”-16 x 1” long
4
80127
E
Carriage nut (included in 84501)
1
n/a
F
Caster wheel - 6” x 2” flat tread
1
130014
Quantities listed are for each front caster
