17
Initial settings
Language, date and time must be reset in the following situations:
When the camera is switched on for the fi rst time.
When the camera is switched on again after it has not been supplied with battery
power for a certain time.
1. Press the
ON/OFF
button to switch on the camera
.
2. Use the
W
/
X
/
S
/
T
buttons to select the desired language and then press the
OK
button.
3. You can then set the date and time.
4. Use the
W
/
X
buttons to select the date, date format or time function you wish to
enter and change the values with the
S
/
T
buttons.
5. Once the date and time have been set correctly press the
OK
button to save
.
6.
The camera then changes to the recording mode
.
Note:
t *GUIFSFDPSEJOHNPEFJTBMSFBEZBDUJWBUFEXIFOUIFDBNFSBJTTXJUDIFEPOTFUEBUFUJNFBOE
language as described in the following sections.
Note:
t 5IFTVQQMJFEQPXFSTVQQMZEJòFSTEFQFOEJOHPOUIFSFHJPOJOXIJDIUIFDBNFSBJTQVSDIBTFE
t 5IFDIBSHJOHEVSBUJPOEFQFOETPOUIFBNCJFOUUFNQFSBUVSFBOEUIFSFNBJOJOHDIBSHFPGUIF
battery. An empty battery is fully charged in approx. 3-4 hours.
t 5IFTVQQMJFE-JUIJVN*POCBUUFSZDPNFTXJUIBNPOUITXBSSBOUZ
