Magigoo Coater, User Manual

Page: 11 / 24

11
Instructions for Use
3.1.2 Assembling the manifold
Read through all the steps before following step-by-step
instructions. Assemble the manifold by attaching the valves
and installing the thin film applicator.
1. Take the manifold. 2. Place one valve over each of the 13
nozzles present on the manifold frame.
3. Insert 6 square nuts (size M3) into manifold cover.
There are designated nests for square nuts.
4. Place the cover with nuts into its designated place. Use the notches to
make sure it is in the correct orientation. Pull on the valves.