Magigoo Coater
User Manual
16
4.
Clean the valves and thin film applicator immediately after the use to avoid clogging
and build-up of dry adhesive.
3.2.3
After Coating
Cleaning the thin film applicator and the valves.
The thin film applicator and valves need to be cleaned after each use.
Use a damp cloth to clean the thin film applicator and the valves.
3.2.4
Cleaning the manifold
Manifold needs to be cleaned thoroughly whenever a glue type is changed, to remove residue
of previous glue. If the Magigoo Coater was not is use over longer period of time, manifold
would need to be cleaned for better performance.
Clean the manifold in a safe place away from other people inside a sink or secondary container.
Looking against the light you should see a very thin even coating of Magigoo.
!
NB! If changing adhesive type in
between the use of the Coater,
the manifold has to be properly
cleaned. See how to clean in point
3.2.4 Cleaning the Manifold
Summary of Contents for Coater
