Magigoo Coater, User Manual

Page: 5 / 24

Safety
5
Safety
1.1 Important Notices
This user manual contains safety notices
and helpful information.
Warns against situation that may cause
injury or damage if the instructions are not
followed.
Provides helpful information to solve
problems or perform a task easily.
1.2 Intended Use
Magigoo Coater is designed and built for
use in FDM/FFF 3D printing to cover the
build plate of a 3D printer with a thin layer
of Magigoo or Magigoo Pro bed adhesive to
increase the reliability of 3D print, reduce
warping and provide easy release. Best
results are achieved on glass build plates.
1.3 General Safety
- Magigoo Coater is intended to help apply
a build plate adhesive on a build plate of
a 3D printer. Generally 3D printers may
generate high temperatures and have hot
moving parts that can cause injury. Use
Magigoo Coater with caution.
- The Magigoo Coater is intended for
professional use. Use only with adhesives
produced by Thought3D Ltd.
- Use Magigoo Coater indoors only.
- Do not use Magigoo Coater on dusty, dirty
or damaged surfaces.
- Store the product in a safe designated
place to avoid injury.
- Change or adjust only approved parts
of the product in accordance with this
manual.
- This product is not intended for children.
- If the Magigoo Coater and Magigoo
products are used by persons with reduced
mental and/or physical capabilities, or
lack of the knowledge and/or experience,
they must be supervised or have been
given instructions about the use of the
product by a person responsible for their
safety.
1.4 Health and Safety
- Do not point The Coater at a person and/
or animal.
- The Coater components may have sharp
edges – handle with caution to avoid cuts.
-
Magigoo Coater is a tool to apply
Magigoo Adhesives. Before using Magigoo
Adhesives follow the safety data sheets
of adhesives for instructions including
but not limited to personal protective
equipment and follow safety instructions.
-
Use only on a 3D printer that is in idle
mode.
-
Use only on build plate that is at room
temperature.
-
Store Magigoo Coater away so it will not
fall, or risk to injure someone.
!