ID Card Printer – User Manual
- 25 -
Replacing the cleaning roller
A new cleaning roller is supplied with every new dye film roll.
–
Open the printer and remove the used dye film
,
then:-
A.
Pull out the used cleaning roller.
(This is the blue roller positioned behind and below the rear dye-film spool).
B.
Remove the metal bar from the centre of this cleaning roller.
C.
Slide the metal bar into the new cleaning roller.
D
.
Peel off the white protective layer carefully to reveal tacky
surface.
E.
Place the new cleaning roller into the printer.
