1) Extension of Remote Start Timer
During the running time, if you press button
I
for 2 sec.
“
Start-Again
”
will scroll across the screen once and the timer will be reset to the preset time.
2) Remote Start Display
If the remote start confirmation is not received by the remote for different reasons,
pressing any button within range of the vehicle will update the remote and show the
remaining run time.
Two-Way Remote User’s Guide
18
~Beeps three times after resetting the runtime.
The remaining
runtime will be
reset.
~Beeps three times after resetting the runtime.
Two-Way Remote User’s Guide
17
Button Functions
Query Function
If button
IV
is pressed for 0.5 sec., the remote and vehicle will respond with
beeps/chirps and parking light flashes to report the status of the vehicle.
Two-Way Remote User’s Guide
16
Division
Armed, Remote Start OFF
Disarmed, Remote Start OFF
Armed, Remote Start ON
Disarmed, Remote Start ON
Car Inspection
Peep
Peep Peep
Peep Peep Peep
Peep Peep Peep Peep
Remote Control Operation
Beep Beep Beep
Beep Beep
Beep Beep Beep Beep Beep Beep
Beep Beep Beep Beep
1. When armed:
The icons of door lock, shock and Car Call flash.
2. When disarmed:
The icon of unlock flashes. Door will be opened.
3. Car s Indoor Temperature Indication
Internal temperature of vehicle will be indicated with
℃
.
(However, the temperature indicated is the temperature of where a sensor is located,
and if temperature sensor doesn
’
t exist, FAIL will be indicated)
The temperature sensor can be located in a specific location per a customer
’
s
request by using the extended cable if needed. (Option)
4. Car s Battery Voltage Check
In checking the conditions of a car, the battery voltage of a car can be checked with
the numbers, if a
IV
button is pressed for 0.5 second, once.
5. Remote Control s Battery Check
After checking the voltage of a car, the battery voltage of a remote control can be
checked with the numbers, if a
IV
button is pressed for 0.5 second, once.
The menu will change from
“
indoor temperature check
” ”
battery voltage check
”
”
the remainder of a remote control battery check
”
in order, if a
IV
button is
pressed.
Changes of Menu
These functions should be operated within transmitting and receiving range
of the vehicle.
Note
Two-Way Remote User’s Guide
15
Button Functions
Trunk Release
The trunk will be opened/unlocked, if a button
III
is pressed for more than 2 sec. If
the alarm is on, it will disarm and unlock the doors as well.
If the vehicle has not a trunk actuator, it may be conve nient
to put the system in Valet mode if you are going to be in the trunk doing work
for an extended period of time.
If the vehicle trunk release is a cable type and not electric, extra installation
steps will be required to make the remote trunk release functional.
On vehicles with a trunk actuator, if the trunk is opened more than 20 sec.
while the vehicle is remote started, the remote start will be cancelled and the
vehicle will shut off.
~Beeps twice.
Flashes 5 times
If trunk sensor is installed in a manual transmission vehicle, opening
trunk will cancel the remote start reservation.
Installation of a trunk open sensor or connection of the sensor wire will
generally cost extra as it is an optional feature.
Note
Trunk Release
The trunk will be opened/unlocked, if a button
III
is pressed for more than 2 sec. If
the alarm is on, it will disarm and unlock the doors as well.
If the vehicle has not a trunk actuator, it may be conve nient
to put the system in Valet mode if you are going to be in the trunk doing work
for an extended period of time.
If the vehicle trunk release is a cable type and not electric, extra installation
steps will be required to make the remote trunk release functional.
On vehicles with a trunk actuator, if the trunk is opened more than 20 sec.
while the vehicle is remote started, the remote start will be cancelled and the
vehicle will shut off.
~Beeps twice.
If trunk sensor is installed in a manual transmission vehicle, opening
trunk will cancel the remote start reservation.
Installation of a trunk open sensor or connection of the sensor wire will
generally cost extra as it is an optional feature.
Note
