Magicar m110as bruger User Manual Download Page 20

Two-Way Remote User’s Guide

40

Two-Way Remote User’s Guide

39

When this product is installed in a manual transmission vehicle, 

it must be set to Manual Transmission Mode. Our company is 

not responsible for any accident resulting from selecting wrong 

mode (Automatic Transmission Mode) for a Manual 

Transmission vehicle. Customer must confirm this with his/her 

installer and check and inspect by himself/herself. 

Automatic transmission vehicles must be checked in the same 

manner, ensuring that the vehicle will not start with the key 

Reservation Mode prevents a manual transmission vehicle from starting in gear if the

system has been installed properly.

When key is turned off, the doors will unlock and the engine will remain running up to

2 minutes. Within the 2 minutes, if a door opens then closes, the engine will shut off
completing the remote start reservation.

[

]

icon shall be displayed to confirm

the reservation.

In the process of Reservation mode set up, the display lights in the instrument 

cluster may be ON for 3 sec after the engine has been turned off. 

(This is a normal process.)

In the process of Reservation mode set up, when the key is removed, the ABS

light may be ON/OFF, this is a normal operation.

Note

Automatic(Passive) Reservation

If button II is pressed for more than 2 sec., before the key turned off and removed from

the ignition, the parking lights will flash and the siren will chirp one time. The engine

will stay running for 2 min. even if the key is taken out of the ignition. Before the 2

min. timer expires, you must get out of the vehicle and shut the door. Once the door

closes the engine will shut off and Reservation mode has now been set. The remote
start availability icon, 

[

]

will be displayed on the remote screen.

Active Reservation

This procedure is for the vehicles that have a problem with the Automatic Reservation 

procedure.

Remote Start Reservation Mode for Manual Transmisson Vehicles

Number of Flashes

Once

Twice

3 times
4 times
5 times

Error Explanation

Engine is already running.
Ignition (Key) is on.
Door open.
Trunk open.
Reservation Mode not set.

(Manual transmission vehicles only.)

If there is a problem remote starting your vehicle, you will hear three chirps from

the remote to indicate that there is a problem. If you go to the vehicle and try again,

an error code will be displayed through the parking lights. The lights will flash

three times, pause, and then flash a number of times equivalent to the error code

number. Example for error code 4, the parking lights will flash three times, pause,

and then flash four times.

Examination of Remote Wakeup Failure

After Reservation Mode has been set up, it will be cancelled if either the trunk or a 

door is opened.

After driving and removing Key, the engine will stay running for 2 minutes. If but

ton

II

is pressed for more than 2 sec. during this time, Reservation Mode will be 

cancelled.

If Valet Mode is ON, Reservation Mode will be cancelled.

Remote Wakeup Reservation

On the slopes, a car may move. You should not set up

the reservation mode. 

Reservation Mode Cancellation in Manual Transmission Vehicles

Summary of Contents for m110as bruger
























Reviews: