background image

Two-Way Remote User’s Guide

12

Two-Way Remote User’s Guide

Unlocking/Disarming

If the system is locked/armed, pressing button 

I

for a half second will unlock the

doors and disarm the alarm. This function will still operate even while the vehicle

is remote started. The remote and vehicle will chirp twice.

~Beeps two, four times

1) Disarming

The door(s) will be unlocked the RPS LED will stop flashing, and the following

details will be indicated according to the number of chirps and parking light 

flashes:

Twice: No trouble while the system was armed.

Four times: Alarm was triggered by strong impact or a opened door.

2) Auto Rearm

If a door has not been opened within 30 sec. of disarming the alarm, the doors

will be relocked and the alarm will arm. This feature is meant to protect against 

an accidental disarm of the system. To prevent the rearm process, simply open 

a door within 30 sec. of disarming the alarm. The system will not arm again 

until given the command through the remote.

In the alarm has been triggered, press button 

I

. The siren will stop, but the 

alarm will still be armed. The system will not respond for the first few 

seconds after the alarm was triggered, this is because it is still trying to 

send a signal out to the remote during that time.
Press button

I

again to disarm the alarm.

Note

Locking/Arming

If the system is unlocked/disarmed, pressing button I for a half second will lock the

doors and arm the alarm. This function will still operate even while the vehicle is

remote started. The remote and vehicle will beep once.

~Beeps once

1) Arming

Red LED of Car Call sensor flashes, and the doors, shock sensor and Car

Call are monitored. 

2) Door Trigger

If the alarm is armed and a door is opened, the alarm will be triggered, playing 

the siren and flashing the parking lights for 30 seconds. (Even if the Siren Chirp 

is turned off.)

3) Shock Sensor

If the shock sensor detects a heavy impact to the vehicle after 30 seconds of the 

alarm being armed, the alarm will be triggered, playing the siren and flashing 

the parking lights for 9 seconds. The remote will be notified of the impact and 

will beep rapidly while displaying the impact icon; a person hitting the wind

shield. The siren will not play at this time if the Siren Chirp has been turned off.

In the case of a light impact, the siren will chirp four times, and the remote will 

display the impact icon.

4) RPS (Remote Paging Sensor)

If the RPS sensor is triggered while the alarm is armed, the remote will be 

paged and will display the RPS icon. 

Siren may go off if you arm the vehicle while the hazard

lights are on. 

11

Summary of Contents for m110as bruger
























Reviews: