Two-Way Remote User’s Guide
20
Two-Way Remote User’s Guide
19
Button Functions
Valet Mode ON/OFF
Activate Valet mode by pressing buttons
I + III
for 0.5 sec. at the same time. (Valet
mode can also be activated with the ignition key as well, see page 36.) Valet mode
will put the system to sleep and almost all functions will be disabled. Remote
lock/unlock, code unlock, remote option programming, and the query function will
still operate.
Two-Way Remote User’s Guide
18
1. Valet Mode OFF
Pressing buttons
I + III
for 0.5 sec. at the same time again will turn Valet mode
OFF, which restores all functions to the remote.
2. Valet Mode Display
The only functions available will be:
1. Button I for 0.5 sec. (lock/unlock)
2. Buttons
I + III
for 0.5 sec. (Valet OFF)
3. Button
IV
for 0.5 sec. (Query Function)
4. Button
III
double press. (EL Lamp ON)
5. Buttons
II + III
for 2 sec. (Remote Set-Up)
If any other functions are attempted, the remote will beep three times and
“
SLEEP
”
will scroll across the screen to indicate that the system is in Valet mode.
~Beeps three times.
Flashes 5 times
When the system is in Valet mode, the alarm is not
active, even when the doors are locked. Any starter or
ignition kill systems that have been installed will be
disabled as well.
If you loan your vehicle to someone who is not familiar
with this CompuStar system, you may want to use
Valet mode to avoid any problems they might have by
accidentally activating various features.
Two-Way Remote User’s Guide
17
Button Functions
Panic Mode four seconds
If button
IV
is held for more than 4 sec., Panic mode will be initiated. The doors will
lock, the parking lights will flash and the siren will play for 1 min. and 30 sec.
“
PANIC
”
will scroll across the remote screen for 30 sec.
Siren Chirp ON/OFF
By pressing buttons
I + II
for 0.5 sec, at the same time, the siren chirps from the vehi-
cle will be muted. To un-mute the siren chirps, press buttons
I + II
for 0.5 sec. again.
Canceling Panic Mode
In operating self-emergency, remote control will be turned off, in the case of
remote wakeup.
In operating self-emergency, a siren will operate for 1 min 30sec, in the case of car
silence.
To cancel Panic mode, press button
I
for 0.5 sec.
Flashes for 30
seconds.
You can use this feature to draw attention to you and your vehicle if you are
attacked or otherwise threatened.
Note
Exception
The siren will still play in these situations:
If the alarm is triggered by opening the trunk or a door.
The siren will still be silent if the alarm is trigger via the shock sensor.
If Panic mode is activated.
Query Function
If button
IV
is pressed for 0.5 sec., the remote and vehicle will respond with
beeps/chirps and parking light flashes to report the status of the vehicle.
Division
Armed, Remote Start OFF
Disarmed, Remote Start OFF
Armed, Remote Start ON
Disarmed, Remote Start ON
Car Inspection
Peep
Peep Peep
Peep Peep Peep
Peep Peep Peep Peep
Remote Control Operation
Beep Beep Beep
Beep Beep
Beep Beep Beep Beep Beep Beep
Beep Beep Beep Beep
1) When armed:
The icons of door lock, shock and Car Call flash.
2) When disarmed:
The icon of unlock flashes. Door will be opened.
3) Car s Indoor Temperature Indication
Internal temperature of vehicle will be indicated with
℃
.
(However, the temperature indicated is the temperature of where a sensor is located,
and if temperature sensor doesn
’
t exist, FAIL will be indicated)
The temperature sensor can be located in a specific location per a customer
’
s
request by using the extended cable if needed. (Option)
4) Car s Battery Voltage Check
In checking the conditions of a car, the battery voltage of a car can be checked with
the numbers, if a
IV
button is pressed for 0.5 second, once.
5) Remote Control s Battery Check
After checking the voltage of a car, the battery voltage of a remote control can be
checked with the numbers, if a
IV
button is pressed for 0.5 second, once.
The menu will change from
in order, if a
IV
button is
pressed.
Changes of Menu
These functions should be operated within transmitting and receiving range
of the vehicle.
Note
Panic Mode
four seconds
If button
IV
is held for more than 4 sec., Panic mode will be initiated. The doors will
lock, the parking lights will flash and the siren will play for 1 min. and 30 sec.
“
PANIC
”
will scroll across the remote screen for 30 sec.
By pressing buttons
I + II
for 0.5 sec, at the same time, the siren chirps from the vehi-
cle will be muted. To un-mute the siren chirps, press buttons
I + II
for 0.5 sec. again.
Canceling Panic Mode
In operating self-emergency, remote control will be turned off, in the case of
remote wakeup.
In operating self-emergency, a siren will operate for 1 min 30sec, in the case of car
silence.
To cancel Panic mode, press button
I
for 0.5 sec.
Flashes for 30
seconds.
You can use this feature to draw attention to you and your vehicle if you are
attacked or otherwise threatened.
Note
Exception
The siren will still play in these situations:
If the alarm is triggered by opening the trunk or a door.
The siren will still be silent if the alarm is trigger via the shock sensor.
If Panic mode is activated.
Siren Chirp (ON/OFF)
10.
