Magewell Pro Convert AES67 User Manual Download

Page: 7 / 67

Cable Connections

1. Plug in the USB cable to USB+POWER port.

2. Plug in the Ethernet cable to ETH+POE port.

3. (Optional) Connect UNBALANCE 3.5mm/BALANCE 4.4mm IN/OUT (if needed) for analog audio.

For power supply: Connect the other end of the USB cable to the power adapter.

■

For USB Net: Connect the other end of the USB cable to your computer.

■

For UAC(USB audio class): Connect the other end of the USB cable to the USB audio source.

■

For PoE: Connect the other end of the Ethernet cable to a PoE switch or a PoE adapter for power and Ethernet connection.

■

For Ethernet connection: To ensure high speed transmission, it is recommended to connect the Pro Convert unit to a gigabit network.

■

Summary of Contents for Pro Convert AES67




































































Search results

Summary of Contents for Pro Convert AES67

Reviews:

Related manuals for Pro Convert AES67

Brands by name

Popular brands

Magewell Pro Convert AES67, User Manual

Search results

Summary of Contents for Pro Convert AES67

Reviews:

Related manuals for Pro Convert AES67

Brands by name

Popular brands